3
Insert a disc into the disc-loading slot.
The disc is loaded, and the LCD panel closes.
Ejecting a disc (for AVIC-Z140BH)
1
Press the
h
button.
The
“
Monitor Setup
”
screen appears.
2
Touch [Disc Eject].
The LCD panel opens, and the disc is ejected.
3
Remove the disc, and press the
h
but-
ton.
The LCD panel closes.
Inserting a disc (for AVIC-X940BT)
CAUTION
Do not insert anything other than a disc into the
disc-loading slot.
%
Insert a disc into the disc-loading slot.
Ejecting a disc (for AVIC-X940BT)
1
Press the
h
button.
The touch panel keys for ejecting the media
appear.
2
Touch [Disc Eject].
The disc is ejected.
Inserting and ejecting an
SD memory card
CAUTION
!
Ejecting an SD memory card during data
transfer can damage the SD memory card. Be
sure to eject the SD memory card by the pro-
cedure described in this manual.
!
If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
!
Do not insert anything other than SD memory
cards.
En
18
Chapter
02
Basic operation
Summary of Contents for AVIC-X940BT
