You can display the video image output by the
equipment connected to the navigation sys-
tem. For details of the connection method,
refer to Installation Manual.
CAUTION
For safety reasons, video images cannot be
viewed while your vehicle is in motion. To view
video images, you must stop in a safe place and
apply the parking brake.
Reading the screen
2
1
1
Current time
2
Source icon
Shows which source has been selected.
Using AV1
You can display the video image output by the
equipment connected to video input 1.
1
Touch [AV1 Input] on the
“
AV System
Settings
”
menu.
=
For details, refer to
2
Display the AV operation screen.
=
For details of the operations, refer to
playing the AV operation screen
3
Tap [AV1] on the left edge of the
screen.
The image is displayed on the screen.
4
Touch the screen to display the touch
panel keys.
Using AV2
You can display the video image output by the
equipment connected to video input 2.
1
Touch [AV2 Input] on the
“
AV System
Settings
”
menu.
=
For details, refer to
2
Display the AV operation screen.
=
For details of the operations, refer to
playing the AV operation screen
3
Tap [AV2] on the left edge of the
screen.
The image is displayed on the screen.
4
Touch the screen to display the touch
panel keys.
Using the touch panel keys
1
2
1
Recalls equalizer curves
=
For details, refer to
2
Hides the touch panel keys
Touching [
Hide
] hides the touch panel keys.
p
If you want to display the touch panel
keys again, touch anywhere on the LCD
screen.
En
154
Chapter
29
Using AV input
Summary of Contents for AVIC-X940BT
