En
g
lis
h
- 88 -
•
Connection via a USB hub is not possible.
•
A USB cable is required for connection.
1
Pull out the USB storage device from the USB cable.
NOTES
•
Check that no data is being accessed before pulling out the USB storage device.
•
Turn off (ACC OFF) the ignition switch before unplugging the USB storage device.
1
Insert the disc (page 86).
TIP
If the disc is already set, select [Disc] as the playing source.
1
Insert the SD memory card into the SD card slot or plug the USB storage device
into the USB connector.
2
Press
then touch
.
3
Touch [USB] or [SD].
Playback is performed in order of folder numbers. Folders are skipped if they contain
no playable files.
USB cable
USB storage device
Unplugging a USB storage device
Starting procedure
For Disc
For USB/SD