Pioneer AVIC-W6600NEX Operation Manual Download

Page: 145 / 186

- 145 -

En
g

lis

– Rear speakers (left/right)
– Noise
– Microphone for acoustical measurement (sold separately)
– Low battery

▶

Performing Auto EQ

CAUTION

Do not turn off the engine while the measurement is in progress.

NOTES

•

Auto EQ changes the audio settings as follows:
– The fader/balance settings return to the center position (page 141).

•

Previous settings for Auto EQ will be overwritten.

Stop the vehicle in a quiet place, close all doors, windows, and sun roof, and then
turn the engine off.

If the engine is left running, engine noise may prevent correct Auto EQ.

NOTE

If driving restrictions are detected during measurement, the measurement is canceled.

Fix the microphone for acoustical measurement (sold separately) in the center of
the headrest of the driver’s seat, facing forward.

The Auto EQ may differ depending on where you place the microphone. If desired,
place the microphone on the front passenger seat and perform Auto EQ.

Disconnect the iPhone or smartphone device.

Turn on the ignition switch (ACC ON).

If the vehicle’s air conditioner or heater is turned on, turn it off.

Switch the AV source to [Source OFF] (page 73).

Press .

Touch

then .

Touch [A-EQ&TA Measurement].

Connect the microphone for acoustical measurement (sold separately) with this
product.

Plug the microphone into the Auto EQ microphone input jack on this product
(page 6).

Plug the microphone into the AUX input jack on the back panel of this product (refer
to the Installation Manual).

W8600NEX

W6600NEX

Summary of Contents for AVIC-W6600NEX



























































































































































































Search results

Summary of Contents for AVIC-W6600NEX

Reviews:

Related manuals for AVIC-W6600NEX

Brands by name

Popular brands

Pioneer AVIC-W6600NEX, Operation Manual

Search results

Summary of Contents for AVIC-W6600NEX

Reviews:

Related manuals for AVIC-W6600NEX

Brands by name

Popular brands