You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio (FM).
%
Press SRC/OFF button to display the
“
TUNER
”
screen.
=
For details, refer to
Switching the audio op-
eration screen
on page 69.
Reading the screen
1
Source icon
Shows which source has been selected.
2
Band
Shows which band the radio is tuned to: FM1
to FM3.
3
Preset number indicated next to
“
P.CH
”
Shows what preset item has been selected.
4
Frequency
5
Signal level indicator
6
Touch panel keys
to
:
Recalls radio stations.
=
For details, refer to
Storing and recalling
broadcast frequencies
on this page.
7
Local
indicator
Shows when local seek tuning is on.
=
For details, refer to
Tuning in strong sig-
nals
on the next page.
8
STEREO
indicator
Shows when the selected frequency is being
broadcast in stereo.
Operating by hardware
buttons
Pressing
BAND/ESC
button
Band can be selected from among
FM1
,
FM2
,
FM3
, or
AM
.
Pressing
MULTI-CONTROL
up or down
You can recall radio stations assigned to pre-
set tuning keys
to
.
Pressing
MULTI-CONTROL
left or right
The frequencies move up or down step by
step.
Pressing and holding
MULTI-CONTROL
left or right
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
p
You can cancel seek tuning by pressing
MULTI-CONTROL
left or right.
Pressing the center of
MULTI-CONTROL
The function select screen appears.
Storing and recalling
broadcast frequencies
With a touch of any of the preset tuning keys
(
to
), you can easily store up to six broad-
cast frequencies for later recall (also with the
touch of a key).
1
When you find a frequency that you
want to store in memory, keep touching a
preset tuning key
to
until the preset
number (e.g., P.CH1) stops flashing.
The selected radio station has been stored in
memory.
p
Up to 18 stations, 6 for each of three FM
bands can be stored in memory.
2
Touch the same preset tuning key
to
.
The radio station frequencies are recalled from
memory.
Using the radio (
FM
)
En
72
Chapter
14