Changing to the splash screen
stored in the SD memory card
You can change the splash screen that ap-
pears when the navigation system starts. Copy
your chosen image to the SD memory card,
and select the image to import.
p
Splash screen images should be used with-
in the following formats;
—
BMP or JPEG files
—
Allowable horizontal and vertical size
are 2 592 pixels x 1 944 pixels or smaller
—
Allowable data size is 6 MB or smaller
p
Proper compatibility with allowable files is
not guaranteed.
p
Imported original images will be stored in
the built-in memory, but the ability to save
these images cannot be guaranteed com-
pletely. If your original image data is de-
leted, insert the SD memory card again
and re-import the original image.
1
Create a folder named
“
Pictures
”
on the
top-most directory of the SD memory card
and store the picture files in this folder.
2
Store the picture files in
“
Pictures
”
.
3
Insert an SD memory card into the SD
card slot.
=
For more details of the operation, refer to
In-
serting and ejecting an SD memory card
on
page 13.
4
Display the
“
System Settings
”
screen.
5
Touch [Splash Screen].
The
“
Select Splash Screen
”
screen appears.
6
Touch [Select from SD].
The
“
Select Splash Screen
”
screen appears.
7
Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
8
Touch [OK].
The image is set as the splash screen, and the
system returns to the
“
System Settings
”
menu.
Setting for rear view camera
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC2). (For de-
tails, consult your dealer.)
Rear view camera
The navigation system features a function that
automatically switches to the full-screen rear
view camera image installed on your vehicle.
When the gear stick is in the REVERSE (R) po-
sition, the screen automatically switches to
full-screen rear view camera.
Camera for Rear view mode
[
Rear View
] can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please be aware that with this set-
ting, camera image is not resized to fit, and
that a portion of what is seen by the camera is
not viewable.
CAUTION
Pioneer recommends the use of a camera which
outputs mirror reversed images, otherwise the
screen image may appear reversed.
p
Immediately verify whether the display
changes to a rear view camera image when
the gearstick is moved to REVERSE (R)
from another position.
p
When the screen changes to full-screen
rear view camera image during normal
driving, switch to the opposite setting in
[
Polarity
].
1
Display the
“
System Settings
”
screen.
2
Touch [Back Camera].
The
“
Back Camera Settings
”
screen appears.
Customising preferences
Engb
76
Chapter
13
