Pioneer AVIC-5100NEX, Operation Manual

Page: 47 / 264

Changing the starting position
The starting position for route can be changed
from the current position.
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
3 Touch [Route Planner] or [My Route].
4 Touch [Current GPS Position].
The pop-up menu appears.
5 Touch [Set Start Point] or [Change Start
Point] and then touch [OK].
6 Search for a location.
7 Touch [Set Start Point] or [Change Start
Point].
The selected position is set as the starting po-
sition for route calculation.
8 Touch [Show Route] or [Continue With-
out Route].
The system starts route recalculation after
[
Show Route ] is touched, and then the
“
Route Summary
”
screen appears. After
[
Start Navigation
] is touched, your navigation
system starts the route guidance.
After [
Continue Without Route ] is touched,
the current position map appears.
Restoring the current position as the
starting position
1 Touch [Route Planner] or [My Route].
2 Touch [Current GPS Position].
The pop-up menu appears.
3 Touch [Back to GPS position] and then
touch [Delete Start Point].
The starting position for route calculation re-
turns to the current position.
Adding waypoints
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
3 Touch [Add Waypoint].
4 Search for a location.
5 Touch [Select as Waypoint].
The route is recalculated, and the
“
Route
Summary
”
screen appears. (When the way-
point is already set, the
“
My Route
”
screen ap-
pears. Touch [
Show Route
] and proceed to
the next step.)
6 Touch [Start Navigation].
Your navigation system starts the route gui-
dance.
Checking route alternatives
You can select another route and compare dif-
ferent route alternatives.
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
3 Touch [Detours & Alternatives].
4 Touch [Alternative Routes].
The
“
Alternative Routes
”
screen appears.
En
47
Chapter
06
Checking
and
modifying
the
curre
nt
route
Checking and modifying the current route