Pioneer AVIC-5100NEX, Operation Manual

Page: 37 / 264

CAUTION
For safety reasons, these route-setting functions
are not available while your vehicle is in motion.
To enable these functions, you must stop in a
safe place and put on the parking brake.
p
Some information regarding traffic regula-
tions depends on the time when the route
calculation is performed. Thus, the infor-
mation may not correspond with a certain
traffic regulation when your vehicle actually
passes through the location in question.
Also, the information on the traffic regula-
tions provided applies for a passenger vehi-
cle, and not for a truck or other delivery
vehicles. Always follow the actual traffic
regulations when driving.
p
[ Destination from Phone ] and [ Online
Search ] on the
“
New Route to...
”
screen
can be used when the
AVICSYNC App
con-
nection is established.
=
Be sure read Expanding the use of the
navigation functions (page 71) before
using the AVICSYNC function.
Searching for a location by
address
The most frequently used function is
“
Ad-
dress
”
, in which the address is specified and
the location is searched.
p
Depending on the search results, some
steps may be skipped.
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
3 Touch [New Route].
The
“
New Route to...
”
screen appears.
4 Touch [Address].
The
“
Find Address
”
screen appears.
5 Touch the following text box and set
the destination you are looking for.
!
Country
:
By default, your navigation system proposes
the country where you are.
If you want to change the area to search set
another country.
!
City or ZIP Code :
By default, your navigation system proposes
the city/town where you are. You can select
the city/town using its postal code instead
of its name.
!
Street
:
If the street name is not available, touch
[
Go to City ] and select the city/town. This
way the center of the selected city/town be-
comes the destination of the route.
!
Select House Number or Intersection :
This item will be displayed after you have
set a street. If the house number is not
available, touch [
Go to Street ] and select
the street. This way the center of the se-
lected street becomes the destination of the
route.
After you touch the selected address to finish
the address search, the searched location ap-
pears on the Map screen.
6 Touch [Select as Destination] on the
“
Map Location
”
screen.
=
For details on the operations in the
“
Map
Location
”
screen, refer to Using the
“
Map
Location
”
screen on page 45.
En
37
Chapter
05
Searc
hing
for
a
destination
Searching for a destination