Pioneer AVH-X8690BT, Owner'S Manual

Page: 45 / 80

19
Chapter
45
Engb
1 Compare the FM tuner volume
level with the level of the source
you want to adjust.
2 Press the HOME button to display
the Top menu screen.
3 Touch the following keys in the
following order.
The “ Audio ” screen appears.
4 Touch [Source Level Adjuster].
The “ Source Level Adjuster ” screen
appears.
5 Touch the following keys to adjust
the source volume.
Increases the source volume.
Decreases the source volume.
p
If you directly touch the area where
the cursor can be moved, the SLA set-
ting will be changed to the value of the
touched point.
p
“ +4 ” to “ –4 ” is displayed as the source
volume is increased or decreased.
p
The default setting is “ 0 ”.
The following AV sources are set to the same source level adjustment volume
automatically.
Required
cable (sold
separately)
Smartphone Setup
AV sources
Device Connection
iPod / iPhone
with a 30-pin
connector
CD-IU201V iPhone/iPod USB
USB1
iPod1
CD-IU201S iPhone/iPod USB
USB1
iPod1
AppRadio
Mode
iPod / iPhone
with a Lightning
connector
CD-IH202
CD-IU52
Lightning
Digital AV
Adapter
iPhone/iPod
Digital AV
adapter
AppRadio
Mode
HDMI
Android device CD-AH200 Others HDMI
AppRadio
Mode
HDMI
p
When a USB storage device is connected
to USB port 1 or USB port 2, the source
level adjustment volume is automatically
set to the same level as the USB port
to which the device is connected. The
source level adjustment volume that is
automatically set varies depending on
whether the device is connected to USB
port 1 or USB port 2.
p
When an iPod / iPhone with a Lightning
connector is connected to USB port 1
or USB port 2 using a USB interface
cable for iPod / iPhone (CD-IU52) (sold
separately), the source level adjustment
volume is automatically set to the same
level as the USB port to which the iPod
/ iPhone with a Lightning connector is
connected. The source level adjustment
volume that is automatically set varies
depending on whether the iPod / iPhone
with a Lightning connector is connected
to USB port 1 or USB port 2.
p
When a MirrorLink device is connected to
USB port 2, the source level adjustment
volume is automatically set to the same
level as USB port 2.
CITRSHMFÐSGDÐÆKSDQ
The following adjustments can be made dur-
ing filter adjustments. Make the appropriate
adjustments for the reproduced frequency
band and characteristics of the connected
speaker unit.
20 1 k
0
10 k
Frequency (Hz)
3 4
5
2
Level (dB)
100
1
1
Reproduced frequency band
2 Slope adjustment
3
Cut-off frequency of the LPF
4
Cut-off frequency of the HPF
5
Level adjustment
■
Adjusting the front and rear
speaker output
You can set the frequency range for the
sound output from the front and rear
speakers.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The “ Audio ” screen appears.
3 Confirm that “Rear Speaker” is set
to “On”.
p
The default setting is “ On ”.
4 Touch [Cross Over].
The “ Cutoff ” screen appears.