Pioneer AVH-X7700BT, Operation Manual

Page: 43 / 66

43
Displaying the “ Audio ” setting
screen
1 Press .
2 Touch , and then
.
The “
Audio
” setting screen appears.
Using fader adjustment
1 Display the “ Audio ” setting screen.
 Displaying the “ Audio ” setting screen on page 43
2 Touch [ Fader ].
3 Touch or to adjust the front/rear speaker
balance.
p
“ Front25 ” to “ Rear25 ” is displayed as the front/rear speaker
balance moves from the front to rear.
p
The default setting is “ F/R 0 ”.
p
Set “ Front ” and “ Rear ” to “ 0 ” when using a dual speaker
system.
 You can also set the fader/balance by dragging
the point on the displayed table.
Using balance adjustment
p
This function is available when “ Standard Mode ” is selected
as the speaker mode.
1 Display the “ Audio ” setting screen.
 Displaying the “ Audio ” setting screen on page 43
2 Touch [ Balance ].
3 Touch or to adjust the left/right speaker
balance.
p
“ Left25 ” to “ Right25 ” is displayed as the left/right speaker
balance moves from the left to right.
p
The default setting is “ L/R 0 ”.
 You can also set the fader/balance by dragging
the point on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the AV source volume
and the iPhone application volume when the navigation outputs
the guidance voice.
1 Display the “ Audio ” setting screen.
 Displaying the “ Audio ” setting screen on page 43
2 Touch [ Mute Level ].
3 Touch the item you want to set.
●
ATT (default):
The volume becomes 20 dB lower than the current volume.
●
Mute :
The volume becomes 0.
●
Off :
The volume does not change.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p
Settings are based on the FM tuner volume level, which
remains unchanged.
p
This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source you want to adjust.
2 Display the “ Audio ” setting screen.
 Displaying the “ Audio ” setting screen on page 43
3 Touch [ Source Level Adjuster ].
4 Touch or to adjust the source volume.
p
If you directly touch the area where the cursor can be moved,
the
SLA
setting will be changed to the value of the touched
point.
p
“
+4
” to “
–4
” is displayed as the source volume is increased
or decreased.
p
The default setting is “
0
”.
Using the auto level control
This function corrects automatically the audio level difference
between the music files or the sources.
1 Display the “
Audio
” setting screen.
 Displaying the “ Audio ” setting screen on page 43
2 Touch [ Automatic Level Control ].
3 Touch the item.
●
Off (default):
Turns the auto level control setting off.
●
Mode1 :
Corrects a little the audio level difference between the music
files or the sources (for the narrow dynamic range audio
signal).
●
Mode2 :
Corrects widely the audio level difference between the
music files or the sources (for the wide dynamic range audio
signal).
Adjusting loudness
This function compensates for deficiencies in the low-frequency
and high-frequency ranges at low volume.
p
This function is not available while you make or receive a call
using the hands-free function.
1 Display the “ Audio ” setting screen.
 Displaying the “ Audio ” setting screen on page 43
2 Touch [ Loudness ].
3 Touch the item.
The following items are available:
Off
(default),
Low
,
Mid
,
High
.
Using the subwoofer output
This product is equipped with a subwoofer output mechanism,
which can be turned on or off.
1 Display the “ Audio ” setting screen.
 Displaying the “ Audio ” setting screen on page 43
2 Touch [ Subwoofer ] to switch “ On ” (default) or
“ Off ”.
Adjusting the cutoff frequency
value
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
Standard Mode : Front, Rear, Subwoofer.
Network Mode : High, Mid, Subwoofer.
p
“ Subwoofer ” is available only when “ Subwoofer ” is “ On ”.
 Using the subwoofer output on page 43
1 Display the “ Audio ” setting screen.
 Displaying the “ Audio ” setting screen on page 43
2 Touch [ Crossover ] or [ Subwoofer Settings ].
3 Touch or to switch the speaker you want
to adjust.
< CRB4437-A >
Audio adjustments