38
You can display the video image output by the device connected
to this product.
p
For details on how to connect the external video component,
refer to the installation manual.
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.
Starting procedure
You can display the video image output by the device connected
to video input.
1 Display the “
System
” setting screen.
2 Touch [
Input/Output Settings
].
3 Set the setting to “
On
”.
4 Display the AV source selection screen.
5 Touch [
AV
].
The image is displayed on the screen.
AV
48
21
Full
6/10
Setting the video signal
When you connect this product to an AV equipment, select the
suitable video signal setting.
p
You can operate this function only for the video signal input
into the AV input.
1 Display the “
Video Setup
” screen.
2 Touch [
Video Signal Setting
].
3 Touch [
AV
].
4 Touch the item you want to set.
The following items are available:
Auto
(default),
PAL
,
NTSC
,
PAL-M
,
PAL-N
,
SECAM
.
< CRB4437-A >
AV input
