Pioneer AVH-X6500DVD, Owner'S Manual

Page: 34 / 196

2 Touch the system key to open the system
menu.
3 If you are adjusting the
Picture Adjustment, select the unit.
NAVI
Apps
Completing Picture Adjust-
ment
for the Navigation system
when the RGB input setting is
set to
NAVI .
Completing Picture Adjust-
ment for the AppRadio Mode
when the RGB input setting is
set to
iPhone (CD-IU201S) or
iPhone (VGA adapter) .
Adjusting the Picture Adjust-
ment for the rear view camera.
Source
Adjusting the Picture Adjust-
ment for the source.
4 Touch any of the following touch panel
keys to select the function to be adjusted.
Picture Adjustment
items are displayed.
!
Brightness
–
Adjusts the black intensity
!
Contrast
–
Adjusts the contrast
!
Color
–
Adjusts the color saturation
!
Hue
–
Adjusts the tone of color (red or green
is emphasized)
!
Dimmer
–
Adjusts the brightness of the dis-
play
!
Temperature
–
Adjusts the color tempera-
ture, resulting in a better white balance
#
You can adjust Hue only when the color system
is set to NTSC.
#
With some rear view cameras, picture adjust-
ment may not be possible.
5 Touch
c
or
d
to adjust the selected item.
Each time you touch
c
or
d
, the level of the se-
lected item increases or decreases.
#
Dimmer can be adjusted from +1 to +48 .
#
Temperature can be adjusted from +3 to
–
3 .
Notes
!
You cannot operate this function while driv-
ing.
!
Different Brightness / Contrast / Dimmer set-
tings can be set for when the illumination
switch is on and when it is off.
Selecting the system language
The system language can be selected.
If text information such as the title name, artist
name or a comment is embedded in a European
language, they can also be displayed on this
unit.
!
The language can be changed for the follow-
ing:
—
Audio menu
—
System menu
—
Video Setup menu
—
Bluetooth menu
—
Language for cautions
Some operations on this unit are prohib-
ited from use while driving or require
careful attention when operated. In such
cases, a caution will appear on the dis-
play. You can change the language for
caution messages with this setting.
!
If the embedded language and the selected
language setting are not the same, text infor-
mation may not display properly.
!
Some characters may not be displayed prop-
erly.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the system
menu.
3 Touch System Language on the system
menu to select the desired language.
4 Touch the desired language.
English (English)
—
Français (French)
—
Español
(Spanish)
—
Portuguese (Portuguese)
— 中 文
(Simplified Chinese)
Setting Demo Mode
Once Demo Mode is turned on, the Demo
screen appears.
Refer to
Demo mode on page 6.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the system
menu.
3 Touch Demo mode on the system menu
to turn Demo mode on or off.
!
On
–
The Demo screen appears.
!
Off
–
The Demo screen does not appear.
Switching sound muting/
attenuation
Sound from this system is automatically muted
or attenuated when a signal from equipment
with a mute function is received.
!
Sound from this system returns to normal
when the muting or attenuation is canceled.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the system
menu.
3 Touch Mute/ATT until the desired setting
appears.
Touch Mute/ATT until the desired setting ap-
pears in the display.
!
Mute
–
Muting
!
ATT
–
20dB
–
Attenuation ( ATT
–
20dB has a
stronger effect than
ATT
–
10dB
)
!
ATT
–
10dB
–
Attenuation
!
Off
–
Turns the sound muting/attenuation off
Notes
!
When Mute is displayed, the sound is turned
off and no audio adjustments can be made.
!
When
ATT
is displayed, the sound is attenu-
ated and only the volume can be adjusted.
(No other audio adjustments can be made.)
!
Operation returns to normal when the phone
connection is ended.
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
Full ) or subwoofer ( Subwoofer )
connection. If you switch the rear output setting
to
Subwoofer
, you can connect a rear speaker
lead directly to a subwoofer without using an
auxiliary amp.
Initially, the unit is set for a rear full-range speak-
er connection (
Full ).
1 Turn the source off.
Refer to Turning the source ON/OFF on page 7.
2 Press the home button to switch to the
home display.
3 Touch the system key to open the system
menu.
4 Touch Rear Speaker on the system menu
to switch the subwoofer output or full-range
speaker.
#
When no subwoofer is connected to the rear out-
put, select Full (full-range speaker).
#
When a subwoofer is connected to the rear out-
put, select Subwoofer (subwoofer).
System settings
34
Section
System settings
En
18
<CRD4711-A/N>34