Pioneer AVH-X390BS, Owner'S Manual

Page: 36 / 204

36
AUX
48 21
Full
6/10
Switches between the video input
and the sound input.
p
A Mini-jack AV cable (CD-RM10) (sold separately) is required
for connection.
 Refer to External video component and the display on page
54
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.
Starting procedure
You can display the video image output by the device connected
to video input.
1 Display the “ System ” setting screen.
2 Touch [
Input/Output settings
].
3 Confirm that “ AUX Input ” is turned on.
4 Display the “ AV source selection ” screen.
5 Touch [ AUX ].
The image is displayed on the screen.
Setting the video signal
When you connect this product to an AUX equipment, select the
suitable video signal setting.
The default setting is “ Auto ”.
p
You can operate this function only for the video signal input
into the AUX input.
1 Display the “
Video Setup
” screen.
2 Touch [
Video Signal Setting
].
3 Touch [
AUX
].
4 Touch the item.
The following items are available:
Auto , PAL , NTSC , PAL-M , PAL-N , SECAM .
You can display the video image output by the device connected
to this product.

Refer to External video component and the display on page
54
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.
Starting procedure
You can display the video image output by the device connected
to video input.
1 Display the “
System
” setting screen.
2 Touch [ Input/Output settings ].
3 Touch [ AV Input ].
X490BS
Set the setting to “
Source
”.
X390BS
Set the setting to “
On
”.
4 Display the “
AV source selection
” screen.
5 Touch [ AV ].
The image is displayed on the screen.
Setting the video signal
When you connect this product to an AV equipment, select the
suitable video signal setting.
The default setting is “ Auto ”.
p
You can operate this function only for the video signal input
into the AV input.
1 Display the “ Video Setup ” screen.
AUX source AV input
< QRD3482-A >
AUX source AV input