!
MANUAL
–
You have to press
OPEN/CLOSE
to open/close the LCD
panel
Adjusting the LCD panel
slide position
You can adjust the LCD panel slide position so
that the panel is set back or forward.
%
Touch FLAP SET BACK on the setup
menu to turn the set back on.
The LCD panel slides to the back.
#
Touch
FLAP SET BACK
again to turn the set
back off and the LCD panel slides to the front.
Setting the clock
Use these instructions to set the clock.
1
Touch CLOCK ADJUSTMENT on the
setup menu.
2
Touch 0 to 9 to set the clock.
#
To cancel the inputted numbers, touch
C
.
3
Touch ENTER.
Note
Touching
24h
/
12h
switches the clock display on
the sub-display between 12/24-hour formats.
Setting the video of rear
display
You can select either showing the same
source as the front display or showing the
video source on rear display independently.
!
When selecting
FRONT
and the selected
source is an audio source, nothing is dis-
played on the rear display.
!
When selecting
FRONT
, audio is not out-
putted from
REAR DISPLAY OUT
.
%
Touch REAR MODE on the setup menu
to select the video on rear display.
Each time you touch
REAR MODE
it switches
between the following settings:
!
FRONT
–
Display the same source as the
front display
!
SEPARATE
–
Display the video source on
rear display independently of front dis-
play
Switching the dimmer
setting for sub-display
To prevent the sub-display from being too
bright at night, the sub-display is automati-
cally dimmed when the car
’
s headlights are
turned on. You can turn dimmer on or off.
%
Touch SUB DISPLAY DIMMER on the
setup menu to turn dimmer on.
#
To turn dimmer off, touch
SUB DISPLAY DIMMER
again.
Adjusting the contrast for
the sub-display
Display contrast adjustment lets you adjust
the display for easier viewing when lighting
conditions change.
%
Touch SUB DISPLAY CONTRAST on the
setup menu to switch the contrast setting.
Each time you touch
SUB DISPLAY CONTRAST
it switches between
HIGH
(high contrast) and
LOW
(low contras-
t).
Setup
En
Section
18