Pioneer AVH-P6300BT, Owner'S Manual

Page: 53 / 104

Audio Adjustments
Note
When selecting FM as the source, you cannot
switch to
Source Level Adjuster .
Using fader/balance adjustment
You can change the fader/balance setting to
provide an ideal listening environment for all
of the occupied seats.
1 Display the audio function menu.
Refer to Introduction of menu operations on
the previous page.
2 Touch Fader/Balance on the audio func-
tion menu.
3 Touch
a
or
b
to adjust the front/rear
speaker balance.
Range: Front:15 to Rear:15
#
Select F/R: 0 L/R: 0 when only using two
speakers.
#
The front/rear speaker balance cannot be ad-
justed when the rear output setting is
Subwoofer . Refer to Setting the rear output and
subwoofer controller on page 60.
4 Touch
c
or
d
to adjust the left/right
speaker balance.
Range: Left:15 to Right:15
Using the equalizer
You can adjust the equalization to match the
car
’
s interior acoustic characteristics as de-
sired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
Powerful
Powerful
Natural Natural
Display Equalizer curve
Vocal Vocal
Custom1
Custom 1
Custom2
Custom 2
Flat
Flat
Super Bass Super bass
!
The equalizer curves for Custom1 and
Custom2
can be adjusted.
!
You cannot select Custom1 and Custom2
when using the auto-equalizer.
!
When
Flat
, no changes are made to the
sound. You can check the effects of the
equalizer curves by switching alternatively
between
Flat
and another equalizer curve.
1 Display the audio function menu.
Refer to Introduction of menu operations on
the previous page.
2 Touch Graphic EQ on the audio function
menu.
#
You can select Graphic EQ when Auto EQ
function is off.
3 Touch
c
or
d
to select the desired item.
Powerful
—
Natural
—
Vocal
—
Custom1
—
Custom2
—
Flat
—
Super Bass
Adjusting the 8-band graphic equalizer
You can adjust the level of each band for the
equalizer curves.
!
A separate Custom1 curve can be created
for each source. If you make adjustments
when a curve other than
Custom2 is se-
lected, the equalizer curve settings will be
stored in
Custom1
.
!
A Custom2 curve that is common for all
sources can be created. If you make adjust-
ments when the
Custom2
curve is se-
lected, the Custom2 curve will be updated.
1 Display the audio function menu.
Refer to Introduction of menu operations on
the previous page.
En
53
Section
14
Menu
operations
Menu operations