!
Ground
–
When the polarity of the con-
nected lead is negative while the gear shift
is in
REVERSE (R)
position
!
Off
–
When a rear view camera is not con-
nected to this unit
Selecting the video format
You can switch the video output format of
REAR MONITOR OUTPUT
between NTSC and
PAL.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Video Output Format on the sys-
tem menu to select the video output for-
mat.
NTSC
—
PAL
Note
You can switch the video output format only for
the source from this unit.
Setting the video signal
When you connect this unit to an AV equip-
ment to this unit, select the suitable video sig-
nal setting.
!
As this function is initially set to
Auto
, the
unit will automatically adjust the video sig-
nal setting.
However, the screen may turn black or
images may not be displayed properly
when
Auto
has been selected and the re-
ception is weak. Normally, select the appro-
priate TV signal.
!
About your country TV signal, consult with
your nearest Pioneer dealer.
!
You can operate this function only for the
video signal input into the AV input.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Video Signal Setting on the func-
tion menu.
Video Signal Setting
items are displayed.
!
AV
–
Adjusts the AV video signal
!
AUX
–
Adjusts the AUX video signal
!
Camera
–
Adjusts the camera video signal
!
TV
–
Adjusts the TV video signal
3
Touch
c
or
d
to select the desired
video signal appears.
Auto
—
PAL
—
NTSC
—
PAL-M
—
PAL-N
—
SECAM
Selecting the area group
1
Select the TV source.
Refer to
2
Display the system menu.
Refer to
Introduction of menu operations
3
Touch TV Country Group on the func-
tion menu.
4
Touch
c
or
d
until the desired area
group appears.
Country1
(CCIR channel)
—
Country2
(IN
channel)
—
Country3
(CHN channel)
—
Country4
(U.K. channel)
—
Country5
(OIRT
channel)
—
Country6
(AUSTRALIA channel)
—
Country7
(SAF channel)
Auto EQ (auto-equalizing)
The auto-equalizer automatically measures
the car
’
s interior acoustic characteristics, and
then creates an auto-equalizer curve based on
that information.
WARNING
As a loud tone (noise) may be emitted from the
speakers when measuring the car's interior
acoustic characteristics, never perform auto EQ
while driving.
CAUTION
!
Thoroughly check the conditions before per-
forming auto EQ as the speakers may be da-
maged if these functions are performed when:
—
The speakers are incorrectly connected.
(For example, when a rear speaker is con-
nected as a subwoofer output.)
En
65
Section
13
Menu
operations
Menu operations
