Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
%
Touch FM Step on the initial menu to
select the FM tuning step.
Touching
FM Step
will switch the FM tuning
step between 50 kHz and 100 kHz. The se-
lected FM tuning step will appear.
#
If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune in the
stations with manual tuning or use seek tuning
again.
Setting the AM tuning step
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
kHz to 1 602 kHz allowable) to 10 kHz (530 kHz
to 1 640 kHz allowable).
%
Touch AM Step on the initial menu to
select the AM tuning step.
Touching
AM Step
will switch the AM tuning
step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.
Adjusting the LCD panel slide
position
You can adjust the LCD panel slide position so
that the panel is set back or forward.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Flap Set Back.
3
Touching the Flap Set Back keys allows
you to move the LCD panel back and forth.
The LCD panel slides to the back.
The LCD panel slides to the front.
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in the
P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function to manual
mode.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch AUTO FLAP to select whether to
open/close the display automatically or
manually.
Each time you touch
AUTO FLAP
the setting
switches between:
!
ON
–
The LCD panel will open or close auto-
matically when the ignition switch is turned
on or off.
!
OFF
–
You have to press
OPEN/CLOSE
to
open/close the LCD panel.
Switching the warning tone
If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone sounds. You can
turn off the warning tone.
1
Display the system menu.
Refer to
Introduction of menu operations
En
65
Section
13
Menu
operations
Menu operations
