Displaying the Bluetooth
system version
(AVH-P3300BT only)
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the system
version. Perform the following procedure to
check the version on this unit.
1
Turn the unit off.
Refer to
2
Display the system menu.
Refer to
Introduction of menu operations
3
Touch Bluetooth Version Information to
display to the version of the Bluetooth
module of this unit.
Setting the rear view camera
(back up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear re-
versed.
This unit features a function that automatically
switches to the rear view camera video (
R.C
IN
) when a rear view camera is installed on
your car and the gear shift is moved to the
RE-
VERSE (R)
position. (For more details, con-
sult your dealer.)
!
After you set up the rear view camera set-
ting, move the gear shift to
REVERSE (R)
and confirm that the rear view camera
video is shown on the display.
!
Change this setting if the display switches
to the rear view camera video by error while
you are driving forward.
!
To stop watching the rear view camera
video and return to the source display,
press and hold
MUTE
.
!
Touch the
RearView
source icon to display
the rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to
lecting a source using the touch panel keys
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Camera Polarity on the system
menu to select the appropriate setting.
!
Battery
–
When the polarity of the con-
nected lead is positive while the gear shift
is in
REVERSE (R)
position
!
Ground
–
When the polarity of the con-
nected lead is negative while the gear shift
is in
REVERSE (R)
position
!
Off
–
When a rear view camera is not con-
nected to this unit
Setting the video signal
When you connect this unit to an AV equip-
ment to this unit, select the suitable video sig-
nal setting.
!
As this function is initially set to
Auto
, the
unit will automatically adjust the video sig-
nal setting.
!
You can operate this function only for the
video signal input into the AV input.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Video Signal Setting on the func-
tion menu.
Video Signal Setting
items are displayed.
!
AV
–
Adjusts the AV video signal
!
AUX
–
Adjusts the AUX video signal
!
Camera
–
Adjusts the rear view camera
video signal
3
Touch
c
or
d
to select the desired
video signal appears.
Auto
—
PAL
—
NTSC
—
PAL-M
—
PAL-N
—
SECAM
Auto EQ (auto-equalizing)
The auto-equalizer automatically measures
the car
’
s interior acoustic characteristics, and
then creates an auto-equalizer curve based on
that information.
<QRB3126-A/N>66
En
66
Section
15
Menu operations
Summary of Contents for AVH-P4300DVD
