System settings
Switching the auxiliary setting
Activate this setting when using an auxiliary
device connected to this unit.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch AUX Input on the system menu
to turn AUX Input on or off.
Setting AV input
Activate this setting when using an external
video component connected to this unit.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch AV Input on the system menu to
turn AV Input on or off.
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
Full
) or subwoofer
(
Subwoofer
) connection. If you switch the
rear output setting to
Subwoofer
, you can
connect a rear speaker lead directly to a sub-
woofer without using an auxiliary amp.
Initially, the unit is set for a rear full-range
speaker connection (
Full
).
!
When the DEQ-P7650/DEQ-P6600 multi-
channel processor is connected to this
unit, you cannot operate this function.
1
Turn the unit off.
Refer to
2
Display the system menu.
Refer to
Introduction of menu operations
3
Touch Rear Speaker on the system
menu to switch the subwoofer output or
full-range speaker.
#
When no subwoofer is connected to the rear
output, select
Full
(full-range speaker).
#
When a subwoofer is connected to the rear
output, select
Subwoofer
(subwoofer).
Notes
!
Even if you change this setting, there will be
no output unless you turn the subwoofer out-
put on (refer to
!
If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
!
Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Setting the FM tuning step
!
The tuning step remains at 50 kHz during
manual tuning.
1
Turn the unit off.
Refer to
2
Display the system menu.
Refer to
Introduction of menu operations
3
Touch FM Step on the system menu to
select the FM tuning step.
Touching
FM Step
will switch the FM tuning
step between 50 kHz and 100 kHz. The se-
lected FM tuning step will appear.
Setting the AM tuning step
%
Touch AM Step on the initial menu to
select the AM tuning step.
Touching
AM Step
will switch the AM tuning
step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.
En
64
Section
13
Menu operations