Pioneer AVH-P3250BT, Operation Manual

Page: 62 / 96

2 Touch DivX Subtitle on the Video Setup
menu to select the desired subtitle setting.
!
Original
–
Display the DivX subtitles
!
Custom
–
Display the DivX external subti-
tles
Notes
!
Up to 42 characters can be displayed on one
line. If more than 42 characters are set, the
line breaks and the characters are displayed
on the next line.
!
Up to 126 characters can be displayed on one
screen. If more than 126 characters are set,
the excess characters will not be displayed.
Displaying the DivX Ò VOD
registration code
In order to play DivX VOD (video on demand)
content on this unit, the unit must first be re-
gistered with a DivX VOD content provider. For
registration, generate a DivX VOD registration
code and submit it to your provider.
!
Keep a record of the code as you will need
it when you register your unit to the DivX
VOD provider.
1 Display the Video Setup Menu.
Refer to Introduction of menu operations on
page 45.
2 Touch DivX VOD on the Video Setup
menu.
Registration Code
and Deactivation Code
appear.
3 Touch Registration Code.
Your registration code is displayed.
Displaying the deactivation code
If your device is already activated, deactivate it
by entering the deactivation code.
1 Display the Video Setup Menu.
Refer to Introduction of menu operations on
page 45.
2 Touch DivX VOD on the Video Setup
menu.
3 Touch Deactivation Code.
#
To cancel deactivation, touch Cancel .
4 Touch OK.
The deactivation completed.
Setting for digital output
Audio which is outputted from digital output
of this unit can be selected. Normally, set to
Stream . If this unit
’
s digital output is not used,
there is no need to change settings.
!
Selecting
Linear PCM
enables you to
switch the output channel if playing the fol-
lowing type of discs. (Refer to
Selecting
audio output on page 35.)
—
Dual mono mode DVD video discs
1 Display the Video Setup Menu.
Refer to Introduction of menu operations on
page 45.
2 Touch Digital Output on the Video
setup menu to select the desired digital
output setting.
!
Stream
–
The Dolby Digital/DTS signal is
output as it is (initial setting)
!
Linear PCM
–
The Dolby Digital/DTS signal
is converted to and output as a linear PCM
signal
Automatic playback of DVDs
When a DVD disc with a DVD menu is in-
serted, this unit will cancel the menu automa-
tically and start playback from the first chapter
of the first title.
!
Some DVDs may not operate properly. If
this function is not fully operated, turn this
function off and start playback.
1 Display the Video Setup Menu.
Refer to Introduction of menu operations on
page 45.
En
62
Section
13
Menu operations