En
g
lis
h
- 43 -
→
The system is paused or performing fast
reverse or forwards during the disc
playback.
– For the media other than music CD
(CD-DA), there is no sound on fast
reverse or forwards.
The icon
is displayed, and operation is
impossible.
→
The operation is not compatible with
the video configuration.
– The operation is not possible. (For
example, the DVD playing does not
feature that angle, audio system,
subtitle language, etc.)
The picture is extremely unclear/
distorted and dark during playback.
→
The disc features a signal to prohibit
copying. (Some discs may have this.)
– Since this product is compatible with
the copy guard analogue copy protect
system, the picture may suffer from
horizontal stripes or other
imperfections when a disc with that
kind of protection signal is viewed on
some displays. This is not a
malfunction.
Dialling is impossible because the touch
panel keys for dialling are inactive.
→
Your phone is out of range for service.
– Retry after re-entering the range for
service.
→
The connection between the mobile
phone and this product cannot be
established.
– Perform the connection process.
→
Of the two mobile phones connected to
this product at the same time, if the first
phone is dialling, ringing or a call is in
progress, dialling cannot be performed
on the second phone.
– When the operation on the first of the
two mobile phones is completed, use
the switch devices key to switch to the
second phone and then dial.
When problems occur with this product, an
error message appears on the display.
Refer to the table below to identify the
problem, then take the suggested
corrective action. If the error persists,
record the error message and contact your
dealer or your nearest Pioneer service
centre.
AMP Error
→
This product fails to operate or the
speaker connection is incorrect; the
protective circuit is activated.
– Check the speaker connection. If the
message fails to disappear even after
the engine is switched off/on, contact
your dealer or an authorised Pioneer
Service Station for assistance.
Error-02-XX
→
The disc is dirty.
– Clean the disc.
→
The disc is scratched.
– Replace the disc.
→
The disc is loaded upside down.
– Check that the disc is loaded correctly.
→
There is an electrical or mechanical
error.
– Press RESET.
Skipped
→
The inserted disc contains DRM
protected files.
– The protected files are skipped.
Problems with the phone screen
Error messages
Common
Disc
