Pioneer AVH-8400BT, Operation Manual

Page: 60 / 88

Introduction of Bluetooth
connection menu operations
Refer to Basic operations on page 9.
If you are using a cellular phone that can be
connected via Bluetooth wireless technology,
we recommend that you use your phone to
search for this unit and establish a connection
between it and your phone. The PIN code is
set to
0000 as default. The product name for
this unit will display on your phone as the de-
vice name. For details, refer to
Entering PIN
code for Bluetooth wireless connection on page
62. For further details concerning the proce-
dures for establishing Bluetooth wireless con-
nections, refer to the instruction manual for
the phone.
Pairing from this unit
01:
Phone1
02:
Phone2
03:
Phone3
1 Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
2 Touch Connection to select a device.
3 Start to search.
Starting to search.
While searching, is displayed and when
available devices are found, the device names
or Bluetooth device addresses (if names can-
not be obtained) are displayed.
#
If you want to switch between the device
names and Bluetooth device addresses, touch
the icon.
Switching between the device
names and Bluetooth device ad-
dresses.
#
To cancel searching, touch Stop .
#
If three devices are already paired,
Memory Full is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to this page.
#
If no device can be found, Not Found is dis-
played. In such cases, check the status of the
Bluetooth device and search again.
4 Touch a device name to select the de-
vice you want to connect to.
While connecting, Pairing is displayed. If the
connection is established, Paired is displayed.
!
If your device support SSP (Secure Simple
Pairing), 6-digit number appears on the dis-
play of this unit. Once the connection is es-
tablished, this number disappears.
#
If the connection fails, Error is displayed. In
such cases, try again from the beginning.
#
The PIN code is set to 0000 as the default, but
can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on page 62.
#
Once the connection is established, the de-
vice name is displayed.
Touch the device name to disconnect.
#
If you want to delete a paired Bluetooth tele-
phone, display Delete OK? . Touch Yes to delete
the device.
Deleting a paired device.
#
Never turn the unit off while the paired
Bluetooth telephone is being deleted.
En
60
Section
13
Menu operations