8
When the 10-second countdown starts,
get out of the car and close the door within
10 seconds.
A measurement tone (noise) is emitted from
the speakers, and auto EQ measurement be-
gins.
When auto EQ is completed,
The measure-
ment has finished. Please disconnect the
microphone and then push HOME key.
is
displayed.
When the car
’
s interior acoustic characteris-
tics cannot be measured correctly, an error
message will be displayed. (Refer to
standing auto EQ error messages
#
It takes about nine minutes for auto EQ mea-
surement to be completed when all the speakers
are connected.
#
To stop auto EQ, touch
Stop
.
9
Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sun-
light for an extended period, high tempera-
tures may cause distortion, color change or
malfunction.
10 Press
h
(eject) to close the panel.
Favorite menu
1
Display menu columns to register.
Refer to
Introduction of menu operations
#
You can customize menus except
Video Setup
menu.
2
Touch and hold the menu column to
register it.
#
To cancel registration, touch and hold the
menu column again.
3
Display the favorite menu and choose a
registered menu.
Refer to
Introduction of menu operations
Note
You can register up to 12 columns.
En
59
Section
13
Menu
operations
Menu operations
