Pioneer AVH-8400BT, Operation Manual

Page: 43 / 88

%
Select Far-End VOL.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
1
—
2
—
3
#
This function can be performed even while
talking on the phone.
#
Settings can be stored for each device.
Switching the ring tone
You can select whether or not to use this
unit
’
s ring tone. If this function is set to on,
the ring tone for this unit will sound.
1 Connect your cellular phone to this
unit.
2 Turn ring tone on or off.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
Using the preset dial lists
You can easily store up to six phone numbers
as presets.
1 Display the preset screen.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
2 Touch one of preset dial keys to select
the desired phone number.
#
If you want to delete a preset phone number,
touch and hold the preset dial key.
3 Make the call.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
4 End the call.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
Making a call by entering
phone number
13 APR
PM
12:25
1
1 2 3
4 5 6
7 8 9
* 0 #
C +
Abcdefghi
XXXXXXXXXXXXXXXX
Private
ON
Vol
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
1 Switch to the entering phone number
mode.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
2 Touch the number icons to input the
numbers.
#
Up to 24 digits can be entered.
3 Make the call.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
4 End the call.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
Note
Entering phone number mode cannot be oper-
ated unless a Bluetooth telephone is connected
to this unit.
Setting the private mode
During a conversation, you can switch to pri-
vate mode (talk directly on your cellular
phone).
Refer to
Introduction of Bluetooth telephone op-
erations on page 28.
En
43
Section
12
Detailed
instructions
Detailed instructions