!
Avoid subjecting the front panel to excessive
shock.
!
Keep the front panel out of direct sunlight and
high temperatures.
!
If removed, replace the front panel on the unit
before starting up your vehicle.
1
Press
h
(eject) to release the front
panel.
2
Touch the detach key.
The front panel automatically
slides toward you.
3
Slide the dial at the bottom of the front
panel to the right, and lift up the front
panel while pushing down on the dial.
4
Put the front panel into the provided
protective case for safe keeping.
Attaching the front panel
1
Slide the front panel into the top of the
unit and push it into place.
Slide the inserter on the front panel into the in-
sertion slot on top of the unit and push it into
place.
2
Push on the bottom of the front panel
until it clicks into place.
Setting the clock
1
Switch to Clock Adjustment display.
Refer to
2
Select the item to set.
3
Touch
a
or
b
to set the correct date
and time.
Resetting the microprocessor
By pressing
RESET
, you can reset the micro-
processor to its initial settings without chan-
ging the bookmark information.
The microprocessor must be reset in the fol-
lowing situations:
!
Before using this unit for the first time after
installation
!
If the unit fails to operate properly
En
13
Section
04
Basic
operations
Basic operations
