Pioneer AVH-1400DVD, Owner'S Manual

Page: 65 / 112

1 Turn the unit off.
Refer to Basic operations on page 11.
2 Press HOME to switch to the HOME dis-
play.
3 Touch System key.
System menu is displayed.
4 Touch Bluetooth Software Update.
5 Touch Start to display the data transfer
mode.
#
Follow the on-screen instructions to finish up-
dating the software.
Displaying the Bluetooth
system version
(Function of AVH-P4490BT/AVH-2490BT)
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the system
version. Perform the following procedure to
check the version on this unit.
1 Turn the unit off.
Refer to Basic operations on page 11.
2 Press HOME to switch to the HOME dis-
play.
3 Touch System key.
System menu is displayed.
4 Touch Bluetooth Version Information to
display to the version of the Bluetooth
module of this unit.
Setting the rear view camera
(back up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear re-
versed.
This unit features a function that automatically
switches to the rear view camera video (
R.C
IN
) when a rear view camera is installed on
your car and the shift lever is moved to the RE-
VERSE (R) position. (For more details, con-
sult your dealer.)
!
After you set up the rear view camera set-
ting, move the shift lever to
REVERSE (R)
and confirm that the rear view camera
video is shown on the display.
!
Change this setting if the display switches
to the rear view camera video by error while
you are driving forward.
!
To stop watching the rear view camera
video and return to the source display,
press and hold
MUTE .
!
Touch the RearView source icon to display
the rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to
Se-
lecting a source using the touch panel keys
on page 12.
1 Display the system menu.
Refer to Introduction of menu operations on
page 45.
2 Touch Camera Polarity on the system
menu to select the appropriate setting.
!
Battery
–
When the polarity of the con-
nected lead is positive while the shift lever
is in
REVERSE (R) position
!
Ground
–
When the polarity of the con-
nected lead is negative while the shift lever
is in
REVERSE (R) position
!
Off
–
When a rear view camera is not con-
nected to this unit
Note
You can also switch the rear view image by press-
ing the touch key, regardless of the
Camera Polarity setting on the sytem menu.
Refer to Basic operations on page 11.
Selecting the video format
You can switch the video output format of
V
OUT
between NTSC and PAL.
1 Display the system menu.
Refer to Introduction of menu operations on
page 45.
<CRB3743-A/N>65
En
65
Section
12
Menu
operations
Menu operations