System settings
Switching the auxiliary setting
Activate this setting when using an auxiliary
device connected to this unit.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch AUX Input on the system menu
to turn AUX Input on or off.
Setting AV input
Activate this setting when using an external
video component connected to this unit.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch AV Input on the system menu to
turn AV Input on or off.
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
Full
) or subwoofer
(
Subwoofer
) connection. If you switch the
rear output setting to
Subwoofer
, you can
connect a rear speaker lead directly to a sub-
woofer without using an auxiliary amp.
Initially, the unit is set for a rear full-range
speaker connection (
Full
).
1
Turn the unit off.
Refer to
2
Press HOME to switch to the HOME dis-
play.
3
Touch System key.
System menu is displayed.
4
Touch Rear Speaker on the system
menu to switch the subwoofer output or
full-range speaker.
#
When no subwoofer is connected to the rear
output, select
Full
(full-range speaker).
#
When a subwoofer is connected to the rear
output, select
Subwoofer
(subwoofer).
Notes
!
Even if you change this setting, there will be
no output unless you turn the subwoofer out-
put on (refer to
!
Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Switching sound muting/
attenuation
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
!
Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Mute/ATT until the desired set-
ting appears.
Touch
Mute/ATT
until the desired setting ap-
pears in the display.
!
Mute
–
Muting
!
ATT
–
20dB
–
Attenuation (
ATT
–
20dB
has a
stronger effect than
ATT
–
10dB
)
!
ATT
–
10dB
–
Attenuation
!
Off
–
Turns the sound muting/attenuation
off
Notes
!
When
Mute
is displayed, the sound is turned
off and no audio adjustments can be made.
!
When
ATT
is displayed, the sound is attenu-
ated and only the volume can be adjusted.
(No other audio adjustments can be made.)
!
Operation returns to normal when the phone
connection is ended.
Selecting the system language
The menu language can be selected from nine
languages.
<CRB3743-A/N>63
En
63
Section
12
Menu
operations
Menu operations