AVD-W9000/UR
25
5
6
7
8
5
6
7
8
C
D
F
A
B
E
8.2 FUNCTION TO CHANGE THE COLOR TEMPERATURE INITIAL VALUE
Function to change the color temperature initial value
When the color tone is different even if same things (for example, map image) are displayed
for shop display because the variation of monitor color temperature between products,
it is possible to change the initial value of color temperature adjustment of product using
the function to change the initial value of color temperature.
For example, if you set the color temperature initial value to +2, the system starts up by
+2 after resetting.
The color temperature adjustment by normal image quality setting MENU can be
implemented normally.
Operation method:
Advance preparation
Implement the color temperature adjustment of image quality adjustment and search the setting value to be set as
initial value.
Change of color temperature initial value
Press the reset key
Press the VOL+ key
Press the VOL- key
Press the VOL+ key
Press the VOL- key
Press the VOL+ key
Press the SOURCE key
"PUSH POWER KEY" is displayed.
Press the WIDE key
Color temperature adjustment MENU is opened
Change the adjustment value: VOL-/+ key
Fix: press the SOURCE key
End
Confirmation
Check the color temperature setting value above remains if the reset is implemented.
Explanation of operation:
Summary of Contents for AVD-W9000
