background image

157

En

 08

Appendix

GNU LESSER GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the 

copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General 
Public License (also called “this License”). Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with 
application programs (which use some of those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. 
A “work based on the Library” means either the Library or any derivative work under copyright law: that is to 
say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated 
straightforwardly into another language. (Hereinafter, translation is included without limitation in the term 
“modification”.)
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, 
complete source code means all the source code for all modules it contains, plus any associated interface 
definition files, plus the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its 
scope. The act of running a program using the Library is not restricted, and output from such a program is 
covered only if its contents constitute a work based on the Library (independent of the use of the Library in a 
tool for writing it). Whether that is true depends on what the Library does and what the program that uses the 
Library does.

1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any 

medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright 
notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of 
any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty 
protection in exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, 

and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also 
meet all of these conditions:

a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the 

date of any change.

c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this 

License.

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application 

program that uses the facility, other than as an argument passed when the facility is invoked, then you 
must make a good faith effort to ensure that, in the event an application does not supply such function or 
table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For 
example, a function in a library to compute square roots has a purpose that is entirely well-defined 
independent of the application. Therefore, Subsection 2d requires that any application-supplied function 
or table used by this function must be optional: if the application does not supply it, the square root 
function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not 
derived from the Library, and can be reasonably considered independent and separate works in 
themselves, then this License, and its terms, do not apply to those sections when you distribute them as 
separate works. But when you distribute the same sections as part of a whole which is a work based on the 
Library, the distribution of the whole must be on the terms of this License, whose permissions for other 
licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; 
rather, the intent is to exercise the right to control the distribution of derivative or collective works based on 
the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work 
based on the Library) on a volume of a storage or distribution medium does not bring the other work under 
the scope of this License.

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given 

copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the 

PRO151FD.book  Page 157  Thursday, July 10, 2008  3:58 PM

Summary of Contents for 151FD - PRO - 60" Plasma TV








































































































































































Reviews: