DAILY MAINTENANCE
3.
REPLACING THE SQUEEGEE RUBBERS
Verify that the state of wear and tear of the squeegee rubbers and, if necessary, replace them. To
replace them you must:
1. Raise the squeegee.
2. Remove the two knobs.
3. Disassemble the squeegee from its support.
4. Remove the tube from the squeegee nozzle so the squeegee can be removed.
WARNING: Before carrying out any type of maintenance,
disconnect the machine's battery connector.
WARNING: This operation must be carried out by using gloves in
order to protect against contact with dangerous solutions.
1.
Unscrew the knobs on the squeegee that block the rubber-pressing blades, and remove them.
2.
Remove the rubber-pressing blades.
3.
Replace the rubbers.
4.
Reassemble everything, carrying out the above-mentioned operations in the reverse order.
WARNING: Before carrying out any type of maintenance,
disconnect the machine's battery connector.
WARNING: This operation must be carried out by using gloves in
order to protect against contact with dangerous solutions.
18
