36
Audio output
Adjusting the sound
1 Turn the [HI], [MID], and [LOW] knobs to adjust the volume of
each band.
Setting the faders
Set the channel fader and crossfader.
CH Curve section
1.
CH 1/2 CURVE knob
Sets the channel fader curve.
—
: Steeply raises the volume when the channel fader is moved close to the top
position.
—
: Gradually raises the volume as the channel fader is moved up.
—
: Steeply raises the volume as the channel fader is moved from the bottom
position.
2.
REVERSE switch
Turns the channel fader reverse function on and off.
1
1
2
2
