28
PC/Mac setup
Setting item
Description
LOOP options.
Mark the check box to activate the loop length set by
the slider.
Clear the check box to set the [
AUTO LOOP
] button on
the unit to work as the Auto Beat Loop button.
PAD MODE options.
Mark the check box to enable Pad mode switching by
pressing a Pad mode button twice in succession.
•
When 2 computers (PC/Mac) are connected to the
unit and the input selector switches for CH 1 and CH
2 are set to the different computers, this setting will
be valid when it’s enabled on each PC/Mac.
Set the range where sound
won’t be output at both
sides of the crossfader.
Use the slider to set the range where sound won’t be
output at both ends of the crossfader.
•
When 2 computers (PC/Mac) are connected to the
unit and the input selector switches for CH 1 and CH
2 are set to [
PHONO/LINE
], this setting is invalid (the
default setting is applied).
Adjust the time it takes to
change the volume to
smooth the rapid volume
variation when you use the
crossfader.
Adjusts the time it takes to change the volume to
smooth the rapid variation in the volume when you use
the crossfader.
•
When 2 computers (PC/Mac) are connected to the
unit, [
NONE
] is automatically applied in the following
cases.
–
The input selector switches for CH 1 and CH 2 are
set to different computers (PC/Mac).
–
The input selector switches for CH 1 and CH 2 are
set to [
PHONO/LINE
].
Time Mode
Sets the time display ([
Elapsed
] or [
Remaining
]) in
WAVEFORM MODE, ARTWORK DISPLAY, and DJ
LOGO DISPLAY on the On Jog Display.
