40
Audio output
Master section
7.
MASTER LEVEL knob
Adjusts the volume for the master sound.
8.
CLIP indicator
Blinks when excessive volume is output from the [
MASTER 1
] or [
MASTER 2
] terminals.
9.
Master level indicator
Displays the volume level of the master sound output to the [
MASTER 1
] and [
MASTER
2
] terminals.
Outputting sound
Adjusting the channel input volume
1 Turn the input selector switch to select an input sound
source.
2 Turn the [TRIM] knob to adjust the volume for the input sound.
The channel level indicator lights up when sound is input to the channel.
Adjusting the channel output volume
1 Move the channel fader to adjust the volume for the output
sound.
2 Move the crossfader to adjust the volume balance of the two
channels.
