12
Part names
Rear panel
1.
1
button
Turns the unit on and off.
2.
Signal GND terminal
Connect a turntable’s ground wire.
Reduces unwanted noises that occur when a turntable is connected to the unit.
3.
PHONO terminals (RCA)
Connect phono-level (MM cartridge) output devices.
•
Do not input line-level signals to the terminals.
•
Remove the short-circuit pin plugs from the terminals when connecting devices.
When you are not using the terminals, attach the short-circuit pin plugs to cut out
external noises.
4.
LINE terminals (RCA)
Connect multi players or line-level output devices.
5.
CDJ/CONTROLLER terminals
Connect compatible multi players or controllers.
WARNING
Keep the short-circuit pin plugs out of the reach of children and infants. If accidentally
swallowed, contact a doctor immediately.
8
10
11
1
2
2
3
4
3
4
5
6
7
9
12
13
