Pinnacle EDGE EX33, Nstallation Instructions, Page: 16 / 25

12655 E. 42nd Ave. #50 Denver, CO 80239 Phone: 303.322.5570 Fax: 303.322.5568 www.pinnacle-ltg.com
First Fixture
48”, 96”, 144”
Spacing
48”, 96”, 144”
Spacing
Consecutive Fixtures
Pendant - Example Rows
Mount Spacing
43-1/2”, 91-1/2”,
139-1/2”
Mount Spacing
43-1/2”, 91-1/2”,
139-1/2”
Individual Fixture
Cross bar
Nut
Pendant Pipe
Fixture Power
Wires
Building Power
Wires
Step 3:
PP Mounting
Step 4:
Making the connections
1. Pull wires through pendant pipe.
2. Make necessary wiring connections, ensuring all wires are
properly matched.
3. Recess wires back into housing.
(Note: UL label side has stripped wires and ground lead.)
1. Attach pendant pipe to fixture. Two (2) mounts for first fixture in
row/ individual, one (1) mount at opposite end for every fixture after.
2. Tighten down Nut to secure pendant pipe to fixture.
3. If power side mount run power wires into housing through pen-
dant pipe.
(Note: Once run is mounted cover any unused knock outs)
PP - to - ST Mount
EDGE
EX33
EX44
© 2017 Pinnacle Architectural Lighting
16 of 25
EdgeEX33_44_Booklet_January 2017
T5/T5HO/T8/LED
1. This product must be installed in accordance with applicable installation and electrical codes by a professional familiar with the
construction and operation of the product.
2. Minimum 90ºC supply conductors
3. All electrical connections must be performed by a certified electrician to applicable local and national electrical codes.
4. Fixtures must be mounted directly to structure.
5. The holding strength of AC cables cannot be guaranteed if the cables are damaged in any way.
Return to
Main Menu