24
Lightning 1000 Installation Guide
Preparing Your Site
When preparing to install your Lightning system, attention should be given
to Environmental, Power and Location requirements.
•
Environmental Requirements
Lightning is designed to operate in normal “machine room” or
“control room” conditions. Care must also be taken to avoid
temperature and humidity extremes.
•
Location and Power Requirements
The following table lists power requirements for the Lightning Chassis.
Lightning Chassis P
Lightning Chassis P
Lightning Chassis P
Lightning Chassis P
Lightning Chassis Po
o
o
o
ow
w
w
w
wer Requir
er Requir
er Requir
er Requir
er Requirements
ements
ements
ements
ements
Parameter
Specification
System voltage (NTSC and PAL) . . . . . . 110/220V auto-sensing, 50/60 Hz
Power consumption . . . . . . . . . . . . . . . . . <500 Watts
The following table lists power requirements for the Lightning ShotBox.
Note that power is supplied from a separate supply.
Lightning ShotBo
Lightning ShotBo
Lightning ShotBo
Lightning ShotBo
Lightning ShotBox P
x P
x P
x P
x Po
o
o
o
ow
w
w
w
wer Requir
er Requir
er Requir
er Requir
er Requirements
ements
ements
ements
ements
Parameter
Specification
System voltage (NTSC and PAL) . . . . . . 110/220V auto-sensing, 50/60 Hz
Power consumption . . . . . . . . . . . . . . . . . <50 Watts
When connecting Lightning, take care to avoid power lines that are
subject to noise and voltage spikes. Do not install the system on a power
circuit that is common to such equipment as air conditioners and refrigera-
tion units. An AC noise filter and surge protector are recommended if
unstable power conditions are present.