manualshive.com logo in svg

Pinnacle Systems Lightning 1000, Installation Manual, Page: 23 / 46

Share
Download
Pinnacle Systems Lightning 1000 Installation Manual Download Page 23

17

Lightning 1000 Installation Guide

4.

Network Card. One RJ-45 jack interconnects to the rear panel
Network connector.

5.

DVE Card. The standard DVE card provides the electronics for
Lightning’s layout, GPI, and remote control capabilities. Two 5-
Pin “D” connectors are provided. Use the upper connector only.

6.

RS-422 Card. This multi-port serial board connects to the four RS-
422 connectors on the rear panel of the chassis via ribbon cables.

7 – 9. Blank Slots.

10. Channel 3 Digital I/O Card (optional). The Channel 3 Digital I/O

card (optional) provides the electronics for the second channel’s
digital video and key inputs and outputs. Five connectors are
provided. See below for details.

11. Channel 2 Digital I/O Card (optional). The Channel 2 Digital I/O

card (optional) provides the electronics for the second channel’s
digital video and key inputs and outputs. Five connectors are
provided. See below for details.

12. Channel 1 Digital I/O Card (standard). The Channel 1 Digital I/O

card (standard) provides the electronics for the first channel’s
digital video and key inputs and outputs.

Note that the connectors descriptions listed below apply to all three
Digital I/O Cards:

a.

Key Out. One mini-BNC jack connects to the rear panel Key
Out connector for the selected channel.

b.

Video Out. One mini-BNC jack connects to the rear panel
Video Out connector for the selected channel.

c.

Key In. One mini-BNC jack connects to the rear panel Key In
connector for the selected channel.

d.

Video Out. One mini-BNC jack connects to the rear panel
Video Out connector for the selected channel.

e.

Reference. For one channel only, one mini-BNC jack connects
to the rear panel Reference In and Reference Loop connectors.
This jack is only connected on Channel 1’s card and is not
used on Channels 2 and 3.

13. Power. The power cable (from the internal power supply) is routed

through this hole to the rear AC connector panel.

14. Keyboard. One 5-pin “PS2” jack interconnects to the rear panel

Keyboard connector.

15. Mouse. One 5-pin “PS2” jack interconnects to the rear panel

Mouse connector.

16. Com 2 (RS-232). This 9-pin connector is an industry-standard RS-

232 port.

a

b

c

d

e

Summary of Contents for Lightning 1000















































Reviews:

No comments