manualshive.com logo in svg

Pinnacle Systems Lightning 1000, Installation Manual, Page: 10 / 46

Share
Download
Pinnacle Systems Lightning 1000 Installation Manual Download Page 10

4

Lightning 1000 Installation Guide

Welcome to Lightning

Pinnacle’s Lightning is an advanced still store that allows you to record and
play stills, organize them into sequences, create transitions between
channels (from the “Preview” channel to the “Air” channel), and create
basic 

layouts with your stills. You can also create your own transitions using

third party plug-ins.

Note

For convenience and speed, the 

Lightning Operator’s Manual is

provided as an online help file instead of a printed document. Please
refer to the online manual for information on how to operate Lightning
with the keyboard and mouse. In addition, please refer to the 

Lightning

ShotBox Tutorial for information on operating Lightning from the
optional ShotBox.

The following sections briefly review Lightning’s features and functions.

Lightning Hardware

The figure below illustrates a basic Lightning system. Optional equipment
is shown connected by dotted lines.

SDI Video Monitors

(customer supplied)

SVGA

Monitor

(customer

Supplied)

Lightning

Channel 2

(optional)

Lightning

Channel 3

(optional)

Lightning

Channel 1

Lightning

Chassis

ShotBox B

(optonal)

ShotBox A

(optional)

Alphanumeric Keyboard

and Mouse

Summary of Contents for Lightning 1000















































Reviews:

No comments