Usage Instructions
Pingi Shoe Dry Advanced
Thank you for purchasing this quality product from the Pingi family: the
new generation of friendly dehumidifiers. We request that you review these
usage instructions carefully and keep them in a safe place.
Application:
This product is specially designed to keep your footwear moisture-free and in form. With
consistent use, it delivers a proven contribution to the increase in the life of the shoes. In
addition, it helps prevent complaints with respect to the skin on the foot which occur due
to walking in damp footwear.
Pingi Shoe Dry quickly dries the shoe from the inside out. It effectively combats
transpiration- and moisture related problems on the inside of the shoe. It combats
bacteria, smells, mould and damage to the lining and insole.
Use this product, for example, in your daily footwear, in wet trainers or with sweaty feet.
Before first use
Please note that it is always necessary to recharge Pingi Shoe Dry before using the product
for the first time. To ensure Pingi Shoe Dry has maximum absorption capacity, please
connect the power plug to the back of the device and insert the plug into the power point.
Recharging begins automatically when Pingi Shoe dry is connected to the mains supply.
When using for the first time, insert both devices into the power point for about 8 – 15
hours. After charging the indicator screen should show a bright blue colour.
Usage Instructions
1.
The indicator screen in the middle of the device will now reveal a bright blue colour.
This means that the entire moisture absorption capacity is available. Pingi Shoe dry is
ready for use and can be inserted into the shoe. The flexible tensioner should be
pushed into the shoe with the ball to the rear. Do not insert the plug into the power
point at this time; Pingi absorbs moisture without using electricity.
2.
During use, the indicator screen changes colour from blue to purple and finally to pink.
This means that the device is completely full of moisture and can be recharged. This
procedure is identical to the initial set-up.
3.
While recharging, the moisture absorbed by the device is released in a steady manner.
After 8 to 15 hours of recharging, the indicator screen will again turn blue. You can
now remove the plug from the power point after which the Pingi Shoe Dry is again
ready for use. Recharging works best in a well-ventilated area indoors and can be
repeated time and time again.
4.
Pingi Shoe Dry is constructed to keep a large variety of shoes in top condition.
Should you have difficulty installing
the device in the shoe despite this,
you may carefully remove the front
portion of the tensioner.
