Pima Hunter-Pro Series, Installation Manual

Page: 52 / 112

Hunter-Pro Series Captain 8 - Installation Guide
52
Char. Parameter Set to “ + ” when...
D Download
Disable Enable/Disable data download (disabled by default). The first time
remote download is required the master user must confirm it by
entering the Master code and pressing [Enter] twice ("Wait for ring"
screen). This will start a 2-minute window for connecting to the
control panel.
R Rem. Disarm
Disab
Enable/Disable remote disarm by phone
Not in use in Captain 8
P Pre Alarm
Report
The system will report when the Entry delay starts
O Tst Rprt in
OFF The control panel will report on tests while disarmed
S Split Account
No. Enable/Disable split account reports: events with account #1 will be
reported to Monitoring Station 1, while events with account #2 will be
reported to Monitoring Station #2.
Use this option only when different account IDs are
required for Double report. If so, it is impossible to
assign different account ID per partition.
D Disarm after
Al. If the system is disarmed immediately after alarm, both events are
reported.
L Not in use -
P Line fault
delay Detection of phone line fault is delayed to prevent false alarms.
6.4.1. Number of rings
Set the number of rings after which the panel will picks up calls. This does not affect the
GSM-200 calls.
To answer a call manually, enter the Master code and press [ENTR] twice.
6.4.2. ACK waiting time
Set the ACK waiting time for the PSTN and GSM channels. The max waiting time for both is
60 sec.
6.4.3. Kissoff delay
Set the Kissoff waiting time. This feature is useful for GSM communication faults.
The delay is in milliseconds. The number set here is multiplied by 250. For example, if set to “7”,
the delay will be 7X250=1750ms.
6.4.4. External line
Set an outside line access number if the phone is connected to a switchboard. Press [*]
repeatedly for the next characters, “P” for a short delay, ‘+’, ‘#’, ‘*’.
6.4.5. PSTN prefix
Set a prefix of up to 12 numerals for the phone numbers. If the External line number is set, the
panel first dials it, then the PSTN prefix, then the phone number.