Key #2: Zones
49
Partition name are displayed only on supervised keypads
5.6.
Copy zone
This feature allows you to copy the settings of a zone's to other zones. It is very useful during the
installation process: once programming a single zone, you can save time by copying its settings to
any other zone.
To copy a zone’s settings:
1.
Select the “Source” zone, from which the settings will be copied.
2.
Select the “Target” zones, to which the settings will be copied.
3.
Select what to copy in the T-C-P screen. See the following table for details.
4.
Wait for the message “Copying Finished”.
5.
Press [END].
Copy options
Param. Option
T
Zone type
C
Zone characteristics
P
Zone partitions
