background image

 

 

 

 

GSM-200 

Quad Band GSM/GPRS Cellular 
Communicator for  
PIMA Intruder Alarm Systems 

Version 3.14 

Installation Guide 

Overview 

The GSM-200 is a Quad Band GSM/GPRS cellular communicator that provides a cellular link to 
PIMA’s Hunter-Pro Series & Captain

1

 alarm systems and the SAT-N communicator. It is based on 

Telit GE864 engine

2

  and can serve for 3 purposes: 

 

Backup (to the telephone line) or main communication channel; 

 

Upload & download via GPRS (using the COMAX application); 

 

Remote access, in the Hunter-Pro Series control panels only; 

The GSM-200 supports GPRS (encrypted), Voice & SMS. 

Product package contents 

 

GSM-200 communicator; 

 

Mounting screws; 

 

Quad band antenna; 

 

Wiring harness to the control panel’s TRANSMITTER socket; 

 

Wiring harness to the control panel’s AUDIO IN/OUT terminals. 

Ver. 3.XX updates  

 

The power supply connector has been removed; the module’s power is now solely supplied 

by the control panel.  

 

Boot loader jumper (to be used only after consulting with PIMA support team). 

 

The Green LED blinking patterns have been modified. See the table on page 4. 

 

A new jumper J1 was added to enable transmitting only in GSM Full rate. 

                                                           

1

 In Captain 6 the GSM-200 only communicates via the Voice channel and only with monitoring stations. 

2

 See 

http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=11

 

Summary of Contents for GSM-200









Reviews: