Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-3
4.2
Configuration
4
Function description
4.2
Configuration
4200
Configuration
4-
4.2.1
PSSu assignment in system environment A
PSSu assignment in system environment A
4-
][Funktionsbeschreibung_BA Konfig FS-Ein
Functions for the FS inputs of a PSSu are defined in the PSSuniversal
Configurator on the PSS WIN-PRO system software:
Read access through the standard bus system
(configured per module):
“R” configuration
Allocation of a test pulse output to an input
(configured per input)
Optimisation of ST process image by combining adjacent bits of the
same type.
“*” configuration
Further information on configuration is available in the PSSuniversal
Configurator's online help.
4.2.1.1
Addresses in the process image
Addresses in the process image
4-
][Funktionsbeschreibung_BA PA 4 x FS-Ein
The module occupies 4 consecutive bit addresses in the process image.
The process image in which the inputs are shown depends on the con-
figuration.
INFORMATION
The PSSuniversal Configurator on the PSS WIN-PRO system
software must be used to define the I/O-Groups to which FS
inputs and outputs belong (SafetyBUS p). The PSSu can be
divided into sections A and B for this purpose. All the FS inputs
on a PSSu always belong to section B.
Section A and section B on a PSSu may belong to different I/O-
Groups.
Configuration
SafetyBUS p
Standard bus system
FS-PII
ST-PII
ST-PIO
None
4 Bit
(e.g.: 32.00 … 32.03)
- - -
- - -
Read ST (“R”)
4 Bit
- - -
