Commissioning
Operating Manual PSENvip RL D P Set
1001641-EN-09
| 78
The tools are displayed as follows on the PSENvip display:
SYSTEM OK
OSSD OFF
TOOL CHANGE
SYSTEM OK
OSSD OFF
TOOL CHANGE
SYSTEM OK
OSSD OFF
TOOL CHANGE
Tool class 1
Tool class 2
Tool class 3
Fig.: Tool detection on the PSENvip display
7.3.3
Make adjustment during tool change
To achieve optimum results, the tool should be aligned to an appropriate bending line dur-
ing initial commissioning (see section entitled "Initial commissioning").
There are two ways of starting the function "Adjustment during tool change":
Option 1
:
}
Press the <MODE> key.
}
Using the keys
, select the
Tool Change
option.
}
Press the <ENTER> key to start the
Tool Change
.
Option 2
:
}
Press the
(
) key to start the
Tool Change
.
