Wiring
Operating Manual PSENvip RL D P Set
1001641-EN-09
| 61
6.2.2
Transmitter
The top of the transmitter has a 4-pin M12 connector.
1
2
3
4
Fig.: Pin assignment of transmitter
The transmitter is connected via a 4-core cable. The cable ends of the Pilz ready-made
cable are colour-coded. Please refer to the table below for the coding details.
Pin assignment of M12 connector X3 on the transmitter
Pin no.
Designation
Description
Colour
1
24 V DC
Input, 24 V DC supply voltage
brown
2
TRM_SYNC
Input, signal to control the intensity of
the light source
white
3
0 V
Input, 0 V supply voltage
blue
4
TRM_ON
Input, signal to switch the light source
on and off
Black
Shield
Cable shielding
6.2.3
Supply voltage
The supply voltage is fed to the receiver and transmitter via the 8-core / 4-core connection
cable.
6.2.4
Connection between transmitter and receiver
The signals TRM_ON and TRM_SYNC are routed via the control cabinet.
