PSEN cs4.2a
Operating Manual PSEN cs4.2a
1003575-EN-08
| 22
A1
A2
I0
I1
A1
A2
Y32
Y1
S11
S21
12
22
1
2
3
4
5
6
7
8
PNOZmulti
0 V
24 V
PSENcode
I2
A1
A2
I0
I1
A1
A2
Y32
Y1
S11
S21
12
22
1
2
3
4
5
6
7
8
Rx
Tx
PNOZmulti
0 V
24 V
PSENcode
Fieldbus module
Without SDD
With SDD
Teaching in the actuator
The first actuator to be detected by the safety switch (see Intended use) is taught in auto-
matically as soon as it is brought into the response range.
NOTICE
No other actuator may be taught in once this actuator has been taught.
Installation
General
CAUTION!
Potential loss of safety function due to changed device properties
The unit's properties may be affected if installed in an environment contain-
ing electrically or magnetically conductive material.
– Please check the operating distances and the assured release dis-
tance.
}
The safety switch and actuator should be installed opposite each other in parallel.
}
Torque setting: Please note the information provided under
}
The distance between two safety switches must be maintained (see
).
