Pilz PNOZmulti 2, Operating Manual

Page: 27 / 112

Fieldbus Modules
Operating Manual Communication interfaces
1002971­EN­03
27
Description Input data from PNOZmulti 2
Virtual inputs i0 – i31 4 Input Bytes
Virtual inputs i32 – i63 4 Input Bytes
Virtual inputs i64 – i95 4 Input Bytes
Virtual inputs i96 – i127 4 Input Bytes
Output data
The Master reads the virtual outputs of the PNOZmulti 2.
Description Output data from PNOZmulti 2
Virtual outputs o0 – o31 4 Output Bytes
Virtual outputs o32 – o63 4 Output Bytes
Virtual outputs o64 – o95 4 Output Bytes
Virtual outputs o96 – o127 4 Output Bytes
4.6.2 Access to table segments
The data in the tables (see Service data [ 65] ) can be requested via the following mod­
ules.
Input data
The Master requests a table segment in the form:
Description Input data from PNOZmulti 2
Table and segment number 2 Input Bytes
Output data
The PNOZmulti 2 replies in the form:
Description Output data from PNOZmulti 2
Table and segment 13 Byte payload 15 Output Bytes
A detailed description is available in the chapter entitled Access to table segments [ 15] .
4.6.3 LED status
The LED status of the PNOZmulti 2 can be requested directly via the following module.
Description Output data from PNOZmulti 2
LED status 1 Output Byte
}
Bit 0 = 1: LED OFAULT is lit or flashes
}
Bit 1 = 1: LED IFAULT is lit or flashes
}
Bit 2 = 1: LED FAULT is lit or flashes
}
Bit 3 = 1: LED DIAG is lit or flashes
}
Bit 4 = 1: LED RUN is lit