Pilz PNOZ m EF 8DI4DO, Operating Manual, Page: 27 / 33

8-1
8.1 Technical details
8 Technical details
8 8000 Technical details Technical details 8- 8.1 Technical details 8100 Technical details 8- ][Technische Daten_multi_Basis_Multi_2
Technical details
Electrical data
Module's current consumption
39 mA
Module's power consumption 1.0 W
Infeed for Supply to the SC outputs
Supply voltage 24 VDC
Voltage tolerance -20 %/+25 %
Max. continuous current that the external power supply
must provide 8.0 A
Potential isolation from system voltage yes
Type of potential isolation Basic insulation
Rated surge voltage 2500 V
Max. power dissipation of the module 4.50 W
Inputs
Number
8
Potential isolation from system voltage no
Input voltage in accordance with EN 61131-2 type 1 24 V DC
Input current at rated voltage 5 mA
Input current range 2.5 - 5.3 mA
Pulse suppression 0.5 ms
Maximum input delay 8 ms
Semiconductor outputs
Number of positive-switching single-pole semiconductor
outputs
4
Potential isolation from system voltage yes
Type of potential isolation Basisisolierung
Rated surge voltage 2,500 V
Voltage 24 V DC
Output current 2.00 A
Output current range 0.00 - 2.50 A
Max. transient pulsed current 12 A
Short circuit-proof yes
Residual current (I
r
) 0.05 mA
Max. internal voltage drop 500 mV
Max. duration of off time during self test 330 µs
Permitted loads inductive, capacitive, resistive
Max. capacitive load 1 µF
Environmental data
Ambient temperature
0 - 60 °C
Forced convection off in control cabinet 55 °C
Storage temperature -25 - 70 °C
Climatic suitability in accordance with standard EN 60068-2-30, EN 60068-2-78
Condensation not permitted
Max. operating height above sea level <2000 m
EMC EN 61131-2
Vibration to EN 60068-2-6
Frequency
5.0 - 150.0 Hz
Max. acceleration 1g
Airgap creepage in accordance with EN 61131-2
Overvoltage category
II
Pollution degree 2