Operating Manual PMCenergy SD
1004547-EN-01
Commissioning
En
gl
is
h
19
5
C
OMMISSIONING
5.1
Connecting the Dynamic Energy Storage Unit
Basic information
• The places of operation must be dry and dust-free.
• The air supplied must not contain any electrically-conductive dust, gas or vapour
which could impair functionality. Corresponding remedial measures must be taken
if necessary.
• The Dynamic Energy Storage Unit may only be operated in ambient temperatures
from 0 - 40 °C.
• The Dynamic Energy Storage Unit may only be operated in connection with an ap
-
plication which has direct access to the DC link capacity.
• The connecting wires (cross-section to comply with your national standards) be
-
tween the Dynamic Energy Storage Unit and the application must not be longer
than 1.0 m, must be laid as a twisted pair and must be proof against short-circuits.
Fig. 6: Connection diagram
1
Application (servo amplifier)
2
Dynamic Energy Storage Unit
D
A N G E R
!
There is a danger of fatal injury.
Danger from electric shock.
The Dynamic Energy Storage Unit may become live if used in
an incorrect area.
⌧
Do not use the Dynamic Energy Storage Unit in IT networks
(IT (Isolated Terra) = floating supplies.)
W
A R N I N G
!
There is a risk of injury!
The housing may heat up to 80° C in operation.
⌧
If you have to work on the Dynamic Energy Storage Unit,
wear heat-resistant safety gloves.
