PNOZ X10.1
Operating Manual PNOZ X10.1
20005-EN-10
| 7
Unit features
}
Positive-guided relay outputs:
– 6 safety contacts (N/O), instantaneous
– 4 auxiliary contacts (N/C), instantaneous
}
Connection options for:
– E-STOP pushbuttons
– Safety gate limit switches
– Start buttons
– Light grids and safety switches with detection of shorts across contacts
}
LED display for:
– Supply voltage
– Input state channel 1/2
– Switch status channel 1/2
– Switch status start relay
}
See order reference for unit types
Safety features
The safety relay meets the following safety requirements:
}
The circuit is redundant with built-in self-monitoring.
}
The safety function remains effective in the case of a component failure.
}
The correct opening and closing of the safety function relays is tested automatically in
each on-off cycle.
Block diagram/terminal configuration
Types: AC
}
U
B
: 230 - 240 VAC; Order no. 774746
S37
Y1
Y2
A1
A2
S34
S33
S22
Y3
S21
S12
S11
S12
S11
*Insulation between the non-marked area and the relay contacts: Basic insulation (over-
voltage category III), Protective separation (overvoltage category II)
